Pharmaland Technologies is committed to providing one-stop solutions for our customers, and provides a wide variety of high-quality auxiliary machines to fit your needs.
Key Features
Parameters
Rejects substandard capsules. In addition to polishing capsules, it automatically reject low-weight capsule, loose piece, and fragments of capsules.
Parameters
This uphill tablet de-duster can be used with tablet press machine & metal detector.
Performance:
Tablets exit the machine at top position. Tablets are lifted & de-dusted at the same time. Tablets moving upwards via uphill sifters make tablets very clean. Adjustable speed. Easy operation and cleaning, convenient to move.
Parameters
Tablets output from tablet press machine are blown off, thus creating no static electricity.
The design adds an isolated plate to prevent the powder from the upper sifter to pollute tablets in the lower layer.
Can be connected on-line with all tablet press machines.
The de-dusting process is visible.
Rotary structure for easy dismantling and cleaning.
Parameters
Strong dust collecting capability
Super-silent design
Can be used in a variety of industries, such as pharmaceutical , nutraceutical , and food.
Can be connected to a variety of other machines, and work continuously for an extended period.
AS59-ll Parameters
XGB-1100 Parameters
Suitable for all sizes of capsules. Easy to operate. High capacity. Low noise.
Integrated air pump provides compressed air. No need for an external air source, so there is no limitation on compressed air.
Can be connected to capsule filling machine. Automatic uploading.
Parameters
ZKSL series vacuum conveyer is specially designed for granular material, utlilzing positive air pressure as its driving force. Uses the partial negative pressure produced by the vacuum generator to convey the material to the working joint. Operates intermittently to finally effect the transfer of material.
Granular material with a diameter more than 0.22μmm can be conveyed. A special structure keeps powder and granular layered phenomena from contaminating. A reserve jet clears the filter when the machine is operating, which guarantees that the equipment will run stably, The discharging point does not need to be sealed or be pressurized.
The machine operates simply without dead angle. It is made of stainless steel, which has no reaction with the material and is erosion resistant.
The machine can be installed and dismantled and cleaned easily, complying with the GMP regulation.
The use of this machine can greatly reduce the loss of material in the transfer process due to contamination, improving productivity.
Parameters
Generally refers to smaller equipment that supports the main production equipment. The auxiliary equipment is usually controlled by auxiliary systems. Usually, the main production equipment will not function without the auxiliary equipment.
Auxiliary equipment can include: Capsule Polisher，Capsule Polisher and Sorter，Tablet De-duster Uphill，Tablet De-duster Uphill，Industrial Dust Collector，Empty Capsule Uploading Machine，Vacuum Loading Machine，Vibrating Sieve，Multi-function Grinder auxiliary equipment list may be different for each production line and each factory. It is best to ask the supplier or manufacturer of the main production equipment for a detailed list of the auxiliary equipment required.
auxiliary equipment is used in the pharmaceutical and nutraceutical industries to complete various processes. The most common auxiliary machines include the tablet de-duster, capsule polisher, dust collector, vacuum feeding machine, empty capsule feeding machine, and de-blisterer. Each of these machines serves a specific purpose in the manufacturing process.
The tablet de-duster is used to remove dust and debris from tablets. The capsule polisher is used to polish capsules and remove any imperfections. The dust collector is used to collect dust from the manufacturing process. The vacuum feeding machine is used to feed empty capsules into the manufacturing process. The empty capsule feeding machine is used to feed empty capsules into the filling machine. The de-blisterer is used to remove tablets from blister packs.
auxiliary machines are an important part of the pharmaceutical and nutraceutical industries. Without these machines, the manufacturing process would not be able to run smoothly. If you are interested in learning more about auxiliary machines, please contact a representative from Pharmaland Machinery today. We would be happy to answer any of your questions.
The downhill tablet de-duster is designed for use in a gravity fed system, where the tablets flow down through the machine. The uphill tablet de-duster on the other hand is designed for use in a positive displacement system, where the tablets are moved up through the machine.
The main difference between these two types of tablet de-dusters is the direction in which they move the tablets. The downhill tablet de-duster moves the tablets down through the machine, while the uphill tablet de-duster moves them up.
Another difference between these two types of machines is the way they are designed to work with different types of tablet coatings. The downhill tablet de-duster is designed to work with tablets that have a water soluble coating, while the uphill tablet de-duster is designed to work with tablets that have a non-water soluble coating.
Finally, the downhill tablet de-duster is typically used for larger batches of tablets, while the uphill tablet de-duster is typically used for smaller batches.
Standard seaworthy wooden case packing.
If there are any special requirements on packing, we can discuss further.
NOTE: The packaging is not designed for long-term outside storage.
Machines are wrapped with plastic film for protection
Standard wood packaging for exporting
Loading goods by forklift
Beijing China
Shenzhen China
Pharmaland technologies proudly stands behind each product sold.
One-year limited warranty and lifetime service are provided.
Machines in the project: A fully automated production line, including a coating machine, tablet press machine, filling machine, mixing machine and blister packing line. In 2016, Pharmaland met a prospective new client from Romania, who was a newcomer to the industry, who was skeptical about......
17 April, 2022 No comment
Machines in the project: a fully automated production line, including a mixing machine, coating machine, blister packaging machine line, pill press machine, filling machine, counting & packing line, etc. In 2018, an existing Pharmaland supplement client wanted to start supplement production in the USA. It......
17 April, 2022 No comment
Machines in the project: mixer, fluid bed dryer, coating machine, hard capsule filling machine, tablet press machine, powder and liquid sachet packing machine and counting line. In 2012, we were awarded a project to rebuild the GMP factory in South Africa which had sustained considerable......
31 March, 2022 No comment
I appreciate their quick response and give me clear guidance during installation, we are happy to work with this high-speed capsule filling machine.
Robert
They keep me updated during the machine production, doing well inspection before shipment, show me the video and ship everything on time. Good Job!
Zed
It is amazing that they prepared all documents which we needed in advance for customs clearance, some I didn't even know in advance, very professional!
Maria
This is the second time to buy a machine from PAG, they are the only supplier we trust, very good machine and they are very professional in customizing the production line for us.
Alfred
Very good experience to work with PAG, both the sales and their service are reliable, and the tablet press machine is easy to use and maintain.
Kenny
Pharmaland Technologies is a technology-based subsidiary of PAG Group, integrating manufacturing and trade, that specializes in supplying pharmaceutical and packaging machines.
The predecessor of PAG group is Honson Pharmatech, established in Canada in 1995.
Pharmaland mainly provides comprehensive solutions for manufacturers of all sizes, providing safe, GMP-compliant “turnkey” engineering equipment. With rich experience in pharmaceutical production, we not only provide customers with suitable machinery, but also provide suggestions for common processes.
We export machines worldwide, including Europe, America, Africa, and Asia.
Our machines have passed ISO 9001 quality system certification and CE certification.
”Quality First, Service Oriented” is our business philosophy. We are committed to providing high-quality pharmaceutical and packaging equipment and solutions for global manufacturers.
Please fill out the information below and a team member will follow up shortly.
